Sliding AMS 2 Pro Mount
A printed cover over a steel shelf and drawer slides, so the AMS pulls out like a drawer.
PLA · ~22h · ~700 g
Maker
Things I make with 3D printers.
6 posts
Things I Printed
Multicolor Figures on the H3C
A hooded Donald and a Goomba, printed in full color in one go.
~8h
AMS 3H Instant Filament Detection
Load a spool mid-print and it is recognized right away, no spinning.
Multipart Bowser Figure
Printed in color-separated parts and glued together piece by piece.
H3C First Print: Capybara Keyring
The first print off a nine-nozzle tool changer.
1h 25m · 24.7 g
Halloween Treat Holders and Pumpkin Bowl
Party gift holders and a bowl, with eye and mouth parts I designed myself.
Wavy-Strip Company Sign
A 500 × 380 mm sign built from 108 printed wavy strips.
PLA · ~66h
Gear
- Bambu Lab H3C
- Tool changer with nine nozzles. Nozzle 8 is TPU-only. Related post
- Bambu Lab X2D
- Printed the wavy-strip sign and Bowser's eyes and mouth. Related post
- Bambu Lab P2S
- Printed Bowser's body and five of the Bulbasaur parts. Related post
- Bambu Lab A2L
- Printed the full AMS 2 Pro sliding cover set on one plate. Related post
- AMS 3H
- Recognizes filament right away, even mid-print. Related post
- AMS 2 Pro
- Pulls out like a drawer from under the steel shelf. Related post
2026
- Sliding AMS 2 Pro Storage with a Steel Shelf and Drawer Slides, All for Under ₩100,000
- Two Multicolor Figures on the H3C, About 8 Hours Each, All in One Go
- Bambu Lab AMS 3H Recognizes Filament Instantly, Even Mid-Print
- Printing and Assembling a Bowser Figure — The Teeth Were the Hardest Part
- Printing a 15cm Bulbasaur in Six Pieces
- Bambu Lab H3C + AMS 3: From Unboxing to First Print